Powerful Flow, Wireless Control
- Magnetically Coupled Wet Side and Dry Side Design
- Broad, Adjustable Flow for Reef Tank Circulation
- Multiple Flow Modes for Different Reef Tank Needs
- Mobius, MXM, and On-Board Control Options
In a reef aquarium, proper flow is critical for coral health, gas exchange, nutrient transport, and overall tank success. VorTech QuietDrive pumps create broad, adjustable water movement with a wide range of flow modes for different reef tank needs, from gentle lagoon-style movement to high-energy reef crest flow and nutrient transport. Combined with QuietDrive performance, Mobius app control, MXM compatibility, and on-board controls, the VorTech QuietDrive gives reef keepers a flexible and refined way to create water movement.
What makes VorTech different from traditional powerheads is the magnetically coupled wet side and dry side design. The wet side sits inside the aquarium to move water, while the motor, power cord, and electrical components stay outside the tank on the dry side. Instead of placing the entire motor assembly underwater, the dry side magnetically drives the wet side through the aquarium glass. This keeps the in-tank footprint smaller, helps reduce heat transfer into the water, removes the need for a power cord inside the aquarium, and leaves less equipment visible inside the tank.
Multiple Flow Modes
Lagoon ModeSimulating a low-energy lagoon. The QuietDrive motor slowly changes, recreating the gentle currents of a lagoon environment.
Reef Crest ModeSimulating currents found around high energy reefs. The pump changes speed frequently emulating crashing waves and tidal surges. This is a great mode for SPS corals.
Gyre ModeUniform circular flow creates motions that help transports water from one side of the tank to the other. With two pumps paired in Gyre Mode, you can oscillate between a clockwise and counterclockwise gyre that lasts from 2 seconds to 2 hours.
Short Pulse ModeStrong short pulses that can be set at intervals of 0.2 seconds up to 2 seconds. This mode can create a standing wave in your tank with the correct frequency.
Tidal Swell ModeA harmonic balance of the ever changing conditions found in the ocean. TSM will vary from calm flow all the way up to chaotic high flow and it even has a pre-programmed detritus cleaning surge that will help suspend particles to be swept into the filtration system.
Nutrient Transport ModeNTM is programmed to create a two-phase circulation flow mode. Phase one consists of wave motions to help stir up and suspend detritus while the second phase incorporates surging motions to help push particles towards the overflow and down into the filter system. This is our favorite mode and is especially great for sensitive corals like LPS and SPS.
Function Modes
Feed ModePause all of your wireless Ecotech Pumps at the push of a button. Pumps will turn down to an idle speed allowing you to feed your tank without the food being pushing into rocks or into the filtration system.
Night ModeSimulate a calmer environment for night time hours. Night Mode can be enabled or disabled with custom hours programmed to automatically turn on and off.
Wave Auto Tune ModeCreate a standing wave in your aquarium to help sweep detritus and other foreign particles from the sandbed. It is amazing what will magically float out of the rocks when a standing wave is created. We highly suggest pairing two wireless pumps for this mode to get the full effect!
Flexible Control Options
Access and program your VorTech pumps through your mobile device to access a myriad of features. A defining characteristic of EcoTech equipment is the versatility and power of control offered to the aquarium hobbyist. The Mobius app is packaging all this capability in a way that makes programming and control intuitive, quick, and painless.
Download the Mobius App:
Neptune Systems, EcoTech Marine, and AquaIllumination have joined forces to bring MXM to life. Now all your favorite EcoTech and AI pumps and lights can be under the wireless control of Apex & Apex Fusion—the user-friendly, yet powerful, interface you already know and love. No more switching between multiple apps.
The included QuietDrive driver/controller gives you direct access to pump control without needing to open an app. Adjust flow, select operating modes, activate Feed Mode, and control your VorTech pump right from the included controller. This gives you multiple ways to control the pump, whether you prefer direct control, Mobius app programming, or Apex control through the MXM module.
VorTech QuietDrive Quick Compare
| Pump | Mobius Ready? | Max Flow Rate | Tank Size | Maximum Tank Thickness | Power Consumption |
|---|---|---|---|---|---|
| MP10mQD | Yes | 2,500+ GPH | 2.5 to 50+ gallons | 0.375 inches (9.5mm) | 8 to 19 watts |
| MP40mQD | Yes | 5,000+ GPH | 50 to 500+ gallons | 0.75 inches (19mm) | 9 to 37 watts |
| MP60mQD | Yes | 9,000+ GPH | 120 to 1,000+ gallons | 0.375 to 1.00 inches (9.5 to 26mm) | 10 to 60 watts |
Specifications
- Pump: MP10mQD
- Mobius Ready? Yes
- Max Flow Rate: 2,500+ GPH
- Tank Size: 2.5 to 50+ gallons
- Maximum Tank Thickness: 0.375 inches (9.5mm)
- Power Consumption: 8 to 19 watts
What’s Included?
- VorTech MP10 Mobius Ready QuietDrive Pump
- QuietDrive driver/controller
- Spacer
- Foam Guard
- Mounting hardware kit
- Power supply
| SKU | 213223 |
|---|---|
| UPC | 653341197221 |
| Apex Compatible | Yes |
| Pump Placement | Submersible |
| Controllable | Yes - wireless control, Yes - onboard control |
| Power Type | DC |
| Powerhead Type | Propeller / Impeller |
| Max Tank Thickness | 10mm / 0.39in. (≈3/8") |
| Standalone | No |
| Aquarium Type | Saltwater, Freshwater |
| Included Mounting | Magnetic |
| Control Type | App, Bluetooth, Digital DC Control (Controller Included), Onboard Controls |
| Compatibility | Apex, Mobius |
| Power Consumption | Up to 19W |
| Additional Notes | Control via Apex requires MXM Module, sold separately. |
Product Questions
Thanks for the question. Yes we sell that here at the link below. Thanks!
https://www.bulkreefsupply.com/vortech-mp10-wet-side-assembly.html
Thank you for reaching out to us. Yes, this will work with the Vortech batter back up and comes with the cord.
Please let me know if you need anything further and take care!
Thank you for reaching out to us. It sticks out approximately 3".
Please let me know if you need anything further and take care!
Thank you for the question. These pumps are not compatible with Neptune Systems Wav Module. To run Vortech Pumps with Neptune Systems controllers, you would need to roll back the software from Mobius back to EcoSmart Live (Older Software) and you would require a WXM module to control it.
With Mobius software, you can connect via bluetooth to your vortech pumps without needing of extra modules and you can program all the flow modes using the Mobius app.
If you have an Apex controller, you can still connect the power supply from the vortech to the Energy Bar for on and off control.
I hope that this was helpful, but, please do not hesitate to contact us again if you have any further questions.
Login and Registration Form