Why does BRS recommend this?
The Syncra Silent line of pumps come in many different sizes and will fit most tank needs. Sicce uses high quality magnets in their pumps, which allows them to spin smoother with less noise than almost all other pumps in their price category. If your tank needs a high flow return pump, or a smaller pump for a low flow reactor our first choice will always be Sicce.
Quiet, energy-efficient pump for a variety of uses in wet or dry application. Use in salt or freshwater.
Features:
- 5 Year Motor Warranty with online registration
- Synchronous motor and advanced rotor result in 100% silent operation
- Adjustable flow rate
- Stainless steel shaft and bearings
- Durable rotor and shaft
- Applications: saltwater aquariums, protein skimmers, indoor fountains
- Submersible or in-line use
- 2.60psi
Specifications
- Output: 357 GPH
- Maximum Head Height: 6 Ft
- Power Consumption: 23W
- Inlet: 1/2" Female NPT or 3/8"-9/16" Hose
- Outlet: 1/2" Female NPT or 3/8"-9/16" Hose
- Dimensions: 4.05" x 2.36" x 3.07"
- Cord Length: 6 ft
- Warranty: 5yr (motor)/6 month (impeller)
Quick Compare - Sicce Syncra Silent Submersible Pumps |
|||||||||
| Model No. | Flow Rate | Power Consumption | Amps | Head Maximum | Inlet/Outlet | Dimension (Inches) | |||
|---|---|---|---|---|---|---|---|---|---|
| 0.5 | 185 GPH | 8W | .12 | 4 Ft | 0.5" - 0.7" | 3.5" x 1.9" x 2.8" | |||
| 1.0 | 251 GPH | 16W | .25 | 5 Ft | 0.5" - 0.7" | 3.5" x 1.9" x 2.8" | |||
| 1.5 | 357 GPH | 23W | .43 | 6 Ft | 0.6" - 0.8" | 4.0" x 2.4" x 3.0" | |||
| 2.0 | 568 GPH | 35W | .65 | 6.5 Ft | 0.8" - 1" | 4.9" x 3.0" x 3.8" | |||
| 3.0 | 714 GPH | 48W | .43 | 9.9 Ft | 0.8" - 1" | 4.9" x 3.0" x 3.8" | |||
| 3.5 | 660 GPH | 68W | .7 | 12.5 Ft | 1" - 1.2"/0.8" - 1" | 6.8" x 3.4" x 4.4" | |||
| 4.0 | 951 GPH | 85W | .85 | 12.5 Ft | 1" - 1.2"/0.8" - 1" | 6.8" x 3.4" x 4.4" | |||
| 5.0 | 1321 GPH | 105W | .95 | 12.6 Ft | 1" - 1.2"/0.8" - 1" | 6.8" x 3.4" x 4.4" | |||
| HF 10.0 | 2500 GPH | 145W | 1.7 | 16.4 Ft | 1" Barb - 1" MPT | 11.38" x 6.29" x 6.69" | |||
| HF 12.0 | 3200 GPH | 165W | 1.9 | 17.05 Ft | 1.5" | 11.38" x 6.29" x 6.69" | |||
| HF 16.0 | 4200 GPH | 190W | 2.0 | 15.4 Ft | 1.5" | 11.38" x 6.29" x 6.69" | |||
Sicce Syncra Silent Instruction Manual
Sicce Syncra Silent Spec Sheet
| SKU | 207733 |
|---|---|
| UPC | 8011469995815 |
| Aquarium Type | Saltwater, Freshwater |
| Variable Speed | No |
| Gallons Per Hour | 300 - 600 GPH |
| Max Head Height | 5 -10 Feet |
| Output Size | 0.375" (3/8 in.), 0.5" (1/2 in.) |
| Power Type | AC |
| Power Consumption | 23W |
| Power Cord Length | 6 Feet |
| Input Size | 0.5" (1/2 in.) |
Write Your Own Review
Product Questions
im planning to use this as a secondary pump to run water thru the Pentair 40w UV sterilizer at about180 gal per hour. Wonder if this pump will be able to do this flow rate after increasing output diameter to 1.5 inch pipe?
Question by: Scott Hanan on Feb 19, 2022, 7:32 AM
The increase in diameter will not impact the flow of this pump. It would still be capable of 357gph before head height and elbows are takin into account.
Answer by: Ashley Hoglund (BRS Staff) on Mar 3, 2022, 3:54 PM
Is this pump suitable to use as the primary return pump in a 72 gallon salt water configuration. My target is approximately 4x tank turnover through a sump.
Question by: Brian on Jun 6, 2018, 1:26 PM
Hi Brian,
Due to head pressure on the pump, you will likely be getting less than 288 GPH of flow into the tank. I would recommend the Syncra Silent 2.0 Pump (568 GPH) or Eheim CompactON 2100 (555 GPH) pumps at a minimum to account for the loss of flow from head pressure.
Both of these pumps can be adjusted to decrease the flow if you find they are too powerful. Alternatively, you can install a ball valve like the ones from Two Little Fishies to adjust the flow.
Due to head pressure on the pump, you will likely be getting less than 288 GPH of flow into the tank. I would recommend the Syncra Silent 2.0 Pump (568 GPH) or Eheim CompactON 2100 (555 GPH) pumps at a minimum to account for the loss of flow from head pressure.
Both of these pumps can be adjusted to decrease the flow if you find they are too powerful. Alternatively, you can install a ball valve like the ones from Two Little Fishies to adjust the flow.
Answer by: Nick on Jun 6, 2018, 5:51 PM
I want to use this pump to feed a Skimz
MONZTER ZM120 EXTERNAL ZEOLITH REACTOR. Can I do it and if so, how?
MONZTER ZM120 EXTERNAL ZEOLITH REACTOR. Can I do it and if so, how?
Question by: Ethan Sooklal on Jan 28, 2018, 9:59 AM
You would just need a section of 1/2" tubing and that will go between the pumps output and the input to the reactor.
Answer by: Charlie on Jan 28, 2018, 12:04 PM
Is this pump a direct replacement for the sicce syncra sk 200? I have a seaside aquatics ES5 protein skimmer that needs a new pump?
Question by: JL on May 10, 2017, 10:24 PM
Hey there,
I'm afraid these pumps are not rated for use as a skimmer pump. They do not have pinwheel impellers for skimmer function and include standard impellers for water movement.
Have a great day!
I'm afraid these pumps are not rated for use as a skimmer pump. They do not have pinwheel impellers for skimmer function and include standard impellers for water movement.
Have a great day!
Answer by: Zack on May 14, 2017, 3:07 PM
Is there a way to attach 1" braided vinyl tubing to this (or should I order smaller tubing)?
Question by: Melissa LeGette on Dec 4, 2016, 4:49 PM
Great question! The outlet for this pump is 1/2". You will not be able to use 1" tubing without using a series reducing fittings. It will also loose more head pressure and gph with the expansion to 1".
Answer by: Randy on Dec 17, 2016, 7:51 AM
What size braided tubing should I run with the 1.5?
Question by: Sean on Nov 12, 2016, 12:27 AM
Great question! The output will accept 3/8"-9/16" hose, in which case, the 1/2" braided vinyl tubing will work. :-)
Answer by: Randy on Nov 14, 2016, 2:43 PM
I want to use this for the BRS duel carbon/GFO reactor as recommended by your company.
How do I attach this to the reactor?
How do I attach this to the reactor?
Question by: Ryan Angelo on Jun 6, 2016, 5:56 PM
Great question!
You will only need on fitting listed below.
1?2" Male NPT x 1?2" Push Connect
SKU: 100003
https://www.bulkreefsupply.com/mur-lok-male-npt-x-push-connect.html
You will only need on fitting listed below.
1?2" Male NPT x 1?2" Push Connect
SKU: 100003
https://www.bulkreefsupply.com/mur-lok-male-npt-x-push-connect.html
Answer by: Connor on Jun 8, 2016, 6:48 PM
Login and Registration Form