
An elegant and highly refined solution to two-part/liquid storage, the DŌS Dual Reservoir integrates with your DŌS or DŌS QuietDrive dosing pump and Apex Controller for real-time monitoring.
Features:
- Large Storage Capacity - Each vessel holds up to 2 liters of fluid for a total storage volume of 4 liters
- Connects directly to your DŌS or DŌS QuietDrive dosing system
- Engineered with a low center of gravity to help avoid tips and spills
- Optical sensors provide real-time fluid levels to the Apex Fusion dashboard
- Easily removable lids to make refills a breeze
- Built using cast acrylic
- Push-fit tubing connections
Specifications:
- Dimensions (approx) - 10.5" x 8.5" x 5.5"
- Capacity - 2000ml per side (0.52 gallons)
- Requires an Apex Controller and DŌS or DŌS QuietDrive dosing system to operate level sensors
What's in the Box?
- DDR with sensors and cable
- 4 meters of tubing
- Getting Started Guide
Important Note:
The DŌS Dual Reservoir (DDR) is intended for use with aquarium additives such as two-part calcium and alkalinity solutions. Do not use alcohol-based liquids, as they are incompatible with the reservoir’s materials and will damage it over time.
SKU | 209104 |
---|---|
UPC | 748252989703 |
Aquarium Type | Saltwater |
Write Your Own Review
Product Questions
Can this be used without Dos? Plugged right into a aquabus
Question by: Robert Escher on Apr 12, 2016, 7:36 PM
Great question!
The DDR requires a 6 pin connector which currently is only on the DOS itself and not on the 1Link module or other modules. Feel free to let us know if you have any further questions!
The DDR requires a 6 pin connector which currently is only on the DOS itself and not on the 1Link module or other modules. Feel free to let us know if you have any further questions!
Answer by: Connor on Apr 13, 2016, 3:31 PM
Does this connect with 2- BOB or 1-Aquabus cable?
Question by: Del on May 22, 2015, 1:30 PM
Great Question,
This unit will connect directly to one of the accessory ports on the DOS. This leaves one extra accessory port for future monitors and the Aquabus cables free for daisy chaining.
This unit will connect directly to one of the accessory ports on the DOS. This leaves one extra accessory port for future monitors and the Aquabus cables free for daisy chaining.
Answer by: Connor on May 22, 2015, 3:10 PM
Login and Registration Form