Elevate Your Aquarium's Water Quality with BRS RO Systems
- Removes Chlorine & Other Contaminants
- High Quality Filters Included
- 75 Gallon Per Day Membrane
- Up to 99% Rejection Rate
- Source & Drain Fittings Included
- Limited Lifetime Warranty
BRS RO Systems are compact, upgradeable, and most importantly, affordable. With upgraded filters and fittings vs the "budget" systems, it's easy to see why BRS RO Systems have been used by so many aquarium hobbyists over the years.
4 Stages of Filtration
Sediment Filter: Stage 1 is the first pre-filter in the system and the first line of defense to remove particles 5 microns and larger from the source water.
Chlorine & VOC Carbon Block Filter: Stage 2 is the first of the two carbon blocks that come pre-installed in the system. This filter is particularly good at removing chlorine. If your source water contains chloramines, we suggest swapping this filter out for a BRS Universal Carbon Block.
Universal Carbon Block: The Universal Carbon Block is the last pre-filter before the water flows to the RO Membrane. BRS Universal Carbon Blocks have been specially formulated for industry leading chloramine and chlorine reduction. Quite simply, this is the best carbon block we sell.
RO Membrane: This RO system utilizes a top quality 75 GPD DOW Filmtec Membrane. This is the industry standard for high performing reverse osmosis membranes and has a rejection rate of up to 99% at peak performance.
What's Included?
4 Stage RO System
Pre-Installed Filters
10’ Red ¼” Tubing
10’ Blue ¼” Tubing
10’ Black ¼” Tubing
Parts Bag w/ Source & Drain Fittings
Filter Wrench
Limited Lifetime Warranty
| SKU | 200416 |
|---|---|
| Aquarium Type | Saltwater, Freshwater |
| Stages | 4 Stage |
| Production Rate | 75 Gallons per Day |
| Waste:Product Water | Standard (3:1) |
| Dimensions | 16" x 6.25" x 15.5" |
| Filter Dimensions | 10 in. x 2.5 in. (Standard) |
| Tubing Length | 10 Ft each of 1/4" blue, red and black tubing |
| Included Filters | Sediment Filter, Carbon Block, 2nd Carbon Block, RO Membrane |
| Included Accessories | Inline Ball Valve, EZ Angle Stop Adapter, Saddle Clamp |
| Warranty | BRS Limited Lifetime Warranty |
| Carbon Block Type | Chloramines/Universal, Chlorine |
| Sediment Filter Type | True Gradient Technology |
| Membrane GPD | 75 |
| Micron Rating | 1, 5 |
| Water Supply Connections | Garden Hose / Laundry Tub, Under Sink Adapter |
Product Questions
The 5 stage system provides dual carbon blocks, which may be an advantage for cities using higher levels off disinfectants such as chloramine, but where TDS and general water quality is moderate and a dual DI resin stage is not needed or wanted. This ensures that there is minimal pass-through at normal production rates and this protects the membrane and keeps it running in peak shape. The membrane will remove upwards of 85% of nitrate from your tap water, and any residual nitrate will be removed by the DI stage.
Hope this helps!
The flow will come out at a steady trickle into very slow stream. For trouble shooting you will want to contact our customer service team directly. Feel free to let us know if you have any further questions!
Ideally the 3 filters should be changed when the TDS on the DI resin is above 0. Typically this is between 6-9 months and sometimes as late as 12 months. Feel free to let us know if you have any further questions!
The ratio of waste to product water is 4:1 (4 parts waste to 1 part product water) This will vary of course depending on the pressure and quality of the incoming water. Feel free to let us know if you have any further questions!
Login and Registration Form