-
+
$132.79
Boost Your RO/DI System's Performance
- Solves Low Pressure Problems: Ideal for RO/DI systems needing a pressure increase.
- Complete Solution: Includes all necessary components for a quick setup.
- Enhanced Efficiency: Improves waste water ratio and membrane performance.
- Noise-Reducing Design: Features a "Flex-Mount" mounting plate that minimizes vibrations.
Experience a significant improvement in your RODI system's efficiency with the Aquatec 8800 Booster Pump Kit. This all-in-one solution not only resolves low pressure issues but also optimizes your RO Membrane's performance, resulting in faster water production, an improved waste water ratio, and reduced DI resin consumption.
The included pressure switch, when paired with a float valve or solenoid, will automatically stop waste water flow shortly after the product water stops. This system is designed to work seamlessly with RO/DI systems equipped with an auto shut-off valve, such as the Bulk Reef Supply brand of RO/DI systems.
Both the booster pump and pressure switch have adjustment screws to allow for a small amount of adjustment, however, no adjustment should be needed in a majority of installations.
How Do I Install the Aquatec 8800 Booster Pump Kit?
Setting up the 8800 Booster Pump Kit is easy and requires just a few basic tools. For full step-by-step instructions, see our installation guide: Installing a Booster Pump on a Reverse Osmosis System
What's Included?
8800 Booster Pump w/ 1/4" Push Connections
Power Supply
Pressure Switch
Note: Aquatec 8800 Booster Pumps require 20 PSI minimum to operate. Not having proper pressure feeding the booster pump will cause poor performance and void the warranty.
| SKU | 200216B |
|---|---|
| Aquarium Type | Saltwater, Freshwater |
Write Your Own Review
Product Questions
does it matter ho far from the water source i set up the booster? i have my RODI about 20 feet from my water source which is under my sink. have my RODI in the basement through thee floor and over to the next room?
Question by: Sean Lyons on Dec 26, 2023, 5:46 PM
Hey there,
Thank you for reaching out to us. Anywhere after the water source is fine. If you have the room I would put it under the sink away from view. Please let me know if you need anything further.
Thank you for reaching out to us. Anywhere after the water source is fine. If you have the room I would put it under the sink away from view. Please let me know if you need anything further.
Answer by: Thomas Wofle (BRS Staff) on Feb 8, 2024, 12:30 PM
Hi, will this work with the 4 Stage Value Plus 150GPD Water Saver RO/DI System?
Question by: Brandon Brown on Jul 10, 2023, 9:17 PM
Hey there,
Thanks for the question. Yes this can be used with that system. Thanks!
Thanks for the question. Yes this can be used with that system. Thanks!
Answer by: Codey on Jul 24, 2023, 3:41 PM
What is the noise and vibration level of this pump during its operation?
Question by: Dan on Jan 27, 2023, 11:25 AM
Thanks for the question! These arent the quietist pumps however when mounted using their provided bracket they do not make as much noise
Answer by: James Johnson (BRS Staff) on Feb 14, 2023, 1:55 PM
Will this work with the Auto Flush Flow Restrictor?
Question by: Peter Howells on Dec 8, 2022, 11:41 AM
Yes it sure will!
Answer by: Rick Pucciarella (BRS Staff) on Dec 15, 2022, 11:46 AM
Does this whole kit also come in the 3/8” pump?
Question by: Ryan Matelski on Nov 5, 2022, 11:44 AM
The 3/8" Aquatec Booster Pump does not have a kit available so each part is separate: https://www.bulkreefsupply.com/3-8-aquatec-8800-booster-pump-bundle.html?queryID=75b69cee5cb3456f14457bdb3edc8048&objectID=11327&indexName=brs_prod_m2_default_products, https://www.bulkreefsupply.com/aquatec-power-supply-for-cdp-8800-pump.html?queryID=f517cc0e299411563ac6fec369f8c464&objectID=414&indexName=brs_prod_m2_default_products. We do not have the 3/8" Auto Flush Flow Restrictor.
Answer by: Scott F. (BRS Staff) on Nov 9, 2022, 3:48 PM
Will this work with the water saver option?
Question by: Richard Goger on Apr 10, 2022, 2:57 PM
Thanks for the question! Yes this booster pump kit is the one we recommend for our water saver units, whether it's the 150GPD or 200GPD water saver RODI systems.
Answer by: Kyle Thomas (BRS Staff) on Apr 12, 2022, 4:06 PM
Will this booster pump preform well enough on a 200gpd system.
Question by: Darin Small on Jan 30, 2022, 3:37 PM
As long as your source pressure is high enough, yes it will work great.
Answer by: Matt Lucero (BRS Staff) on Feb 3, 2022, 10:10 AM
Hi...will this work on the 7 Stage PRO Plus 150 GPD Water Saver RO/DI System?
Thanks!
Thanks!
Question by: Gilbert E Swain on Dec 5, 2021, 11:15 AM
Thank you for reaching out. the 1/4" 8800 booster pump works great with the 7 stage 150 GPD system. It is what I use at home. It boosts my 40 PSI source water up to 70 PSI.
Answer by: William Glenn (BRS Staff) on Dec 15, 2021, 8:36 AM
Will this kit work properly with 25-30psi source water and feeding a 6 stage 75gpd BRS RODI system with 150gpd upgrade kit? I have read in a couple places that the 8800 pump is rated for 50-100gpd units.
Question by: Mich on Nov 5, 2021, 1:48 PM
Yes, that will work properly with your unit.
Answer by: Matt Lucero (BRS Staff) on Nov 5, 2021, 2:32 PM
Login and Registration Form