Sicce's MicraPlus pump is a fully submersible, compact pump with suction inlet is on the bottom for optimum operation with low water levels. Small size is great for indoor or outdoor fountains, aquariums and terrariums.
- Output: 158 GPH
- Max Head Height: 2.8 Ft
- Flow Regulator
- Power Consumption: 6.8W
- Outlet Tube Adapter Size: 1/2 or 3/8""
- Dimensions: 1.69" x 2.24" x 2.04"
- Silent operation
Features:
- 2 Year Manufacturer's Guarantee
- Driven by a permanent magnet type synchronous motor
- Adjustable flow rate
- Stainless steel shaft
- Interchangeable sponge filter
- Applications: aquariums, terrariums, internal or external fountains, landscaping construction and for any application which requires the recirculation of water.
- Submersible
- Connections: 1/2" (13mm) inside diameter for rigid piping or 12mm inside diameter for flexible hose
- CE & UL listed
Sicce Micra Instruction Manual| SKU | 207730 |
|---|---|
| UPC | 8011469999653 |
| Installation | Submersible |
| Controllable | No |
| Power Type | AC |
| Max Head Height | Under 5 Feet |
| Duty Rating | Continuous |
| Aquarium Type | Saltwater, Freshwater |
| Dimensions | 1.69" x 2.24" x 2.04" |
| Included Mounting | Suction Cup |
| Flow Rate | 158 GPH |
| Control Type | Preset Plug & Play (No Controls) |
| Pump Rotor Type | Impeller |
| Outlet | Outlet Tube Adapter Size: 1/2" or 3/8" |
| Power Consumption | 6.8W |
| Warranty | 2-Year Manufacturer Warranty |
Write Your Own Review
Product Questions
Does SKU 210096 Mur-lok Reducing Union 1/2" x 3/8" Push Connect - G.A. Murdock fit on the end of this pump?
Question by: Rick on Dec 16, 2022, 9:38 AM
The Mur-lok fitting will not work with this pump. The pump will take vinyl tubing though and could be converted with a stem adapter found below.
https://www.bulkreefsupply.com/mur-lok-stem-adapter-tube-x-hose-stem.html?queryID=710dfa9101ad518c1e45a5b1dbfb156e&objectID=4080&indexName=brs_prod_m2_default_products
https://www.bulkreefsupply.com/mur-lok-stem-adapter-tube-x-hose-stem.html?queryID=710dfa9101ad518c1e45a5b1dbfb156e&objectID=4080&indexName=brs_prod_m2_default_products
Answer by: Rick Pucciarella (BRS Staff) on Dec 16, 2022, 9:40 AM
What size tubing would you need for this?
Question by: Maddox on Sep 15, 2022, 6:32 PM
Hi! Depending which tube adapter you use, this can connect to 1/2" or 3/8" tubing. If you have any questions please do not hesitate to reach via email or by giving us a call.
Answer by: Adam Malik (BRS Staff) on Sep 20, 2022, 6:39 PM
Can this pump be used with the Tunze 3155 osmolator? if so does it have a plug or bare wire ends?
Question by: Grant on Sep 10, 2020, 9:02 AM
Hey there,
Thank you for reaching out to us! You would need the Switched Socket to use it with an Osmolator. It has a standard plug at the end.
https://www.bulkreefsupply.com/tunze-osmolator-switched-socket-outlet.html
Please let me know if you need anything further and take care!
Thank you for reaching out to us! You would need the Switched Socket to use it with an Osmolator. It has a standard plug at the end.
https://www.bulkreefsupply.com/tunze-osmolator-switched-socket-outlet.html
Please let me know if you need anything further and take care!
Answer by: Matt Lucero on Sep 10, 2020, 10:03 AM
Is this pump a little too much for an ATO system?
Question by: Bec on Jan 4, 2017, 12:04 AM
Great question!
This has a maximum head height of 2.6 feet meaning it cannot pump and higher than 2 feet. That limitation makes it far under powered for most ATO applications. Feel free to let us know if you have any further questions!
This has a maximum head height of 2.6 feet meaning it cannot pump and higher than 2 feet. That limitation makes it far under powered for most ATO applications. Feel free to let us know if you have any further questions!
Answer by: Randy on Jan 10, 2017, 5:36 PM
Hello!
I'm considering this pump for a 10 gallon QT tank would it be enough to circulate 10 gallons effectively ?
Also to move water in a 5 gallon bucket for curing live rock?
thanks!
I'm considering this pump for a 10 gallon QT tank would it be enough to circulate 10 gallons effectively ?
Also to move water in a 5 gallon bucket for curing live rock?
thanks!
Question by: Steven on Jan 4, 2017, 12:01 AM
Great question! As far as a circulation pump for moving water in a 5gal bucket, I think this pump may be sufficient for that purpose. I would have to say that as a circulation pump for a 10gal tank, this is under powered and you would be better served with something in the 200-300 GPH pump. :-)
Answer by: Randy on Jan 10, 2017, 5:29 PM
Would this work for pumping water back into the tank from our fresh mixed water bucket after a water change?
Question by: Mike on Apr 2, 2016, 11:19 AM
Great question!
This has a maximum head height of 2.6 feet meaning it cannot pump and higher than 2 feet. this would be very limited for pumping any water besides on a very small 5 gallon tank. Feel free to let us know if you have any further questions!
This has a maximum head height of 2.6 feet meaning it cannot pump and higher than 2 feet. this would be very limited for pumping any water besides on a very small 5 gallon tank. Feel free to let us know if you have any further questions!
Answer by: Connor on Apr 5, 2016, 5:31 PM
Is the footprint of this pump 1.69"x2.24" or is some extra added in for cord thickness?
Question by: Joel on Jan 18, 2016, 9:55 PM
Great question!
The footprint is 1.69" x 2.24" for the power cord you will need an extra 1/2" for it to comfortable bend around at the 2.24" length. Feel free to let us know if you have any further questions!
The footprint is 1.69" x 2.24" for the power cord you will need an extra 1/2" for it to comfortable bend around at the 2.24" length. Feel free to let us know if you have any further questions!
Answer by: Connor on Jan 27, 2016, 2:02 PM
Login and Registration Form